0086-87209980                sales@biaodefu.net                0086-13719443392
E-mail:sales@biaodefu.net
Home > Knowledge > Content
How to maintain the display stand
- Oct 11, 2017 -

1. Dishcloth must be clean

When cleaning and maintaining the display rack, it is important to determine whether the rag used is clean. When cleaning or wiping away dust, be sure to turn over or change a clean rag before using. Do not lazy and repeated use of the dirty side, this will only make the dirt repeatedly on the commercial furniture surface friction, but will damage the light surface of the display frame.

2. Choice of nursing Agent

To maintain the original brightness of the display shelf, there are two display racks care spray and cleaning and maintenance agent. The former mainly for a variety of wood, polyester, paint, fire-resistant plastic panels and other materials display frame, and there are two different flavors of jasmine and lemon fresh fragrance. The latter is applicable to a variety of wood, glass, synthetic wood or the United States and other solid wood display racks, particularly suitable for mixed material display. Therefore, if we can use the maintenance products which are both clean and nursing effect, we can save a lot of valuable time.

Nursing Spray Wax and cleaning maintenance agent before use, it is best to shake it evenly, and then hold the spray tank, a 45 degree angle, so that the liquid components in the tank can be completely released under pressure state. After the dry rag in the distance of about 15 centimeters gently spray, so again to wipe commercial furniture, can play a good cleaning and maintenance effect. In addition, when the rag is used, remember to clean and dry. As for the display frame with fabric material, such as fabric sofa, leisure cushion, you can use clean carpet cleaning and maintenance agent. When used, the dust is first vacuumed with a vacuum cleaner, and then a small amount of carpet cleaner is sprayed on a damp cloth.

3. Paint Surface watermark Removal

A wet cup of paint on the table will often leave a circle of annoying watermark, how can you quickly remove them? You can put a clean wet cloth on top of the watermark on the desktop, and then use the iron to iron it at a lower temperature so that the moisture from the film can evaporate and the watermark will disappear. However, when using this method, the use of the cloth can not be too thin, the temperature of the iron is not too high. Otherwise, the watermark on the desktop is gone, but the branding is no longer removed.